The container is suspended from the front and side of the container

Update:29-09-2018
Summary:

The container is suspended from the front and side of t […]

The container is suspended from the front and side of the container. It can be used for loading and unloading of 20-foot and 40-foot containers. When lifting the container, the front crane does not have to be perpendicular to the container and can be angled with the container. container spreader After lifting, the spreader can be rotated to pass through a narrower passage. At the same time, the spreader can be moved to the left and right sides by 800mm, so that the box can be lifted during lifting to improve work efficiency. For freight stations with poor site conditions, the front hoist can also work normally.

The telescopic boom can carry the variable amplitude, and the take-off and landing of the container is completed by the telescopic expansion and the amplitude of the boom. When the boom is extended and the tilting cylinder is extended, the lifting speed is faster, and the lock is simultaneously locked when descending. In, you can get a faster rate of decline. During the operation, the vehicle can be walked, the amplitude is changed, and the boom is telescopic, which has high working efficiency.
The operating procedure for the front hoist is to hoist the arm. Because you have to pick up the yard after stacking or dump the container tow. But this process cannot be done during the driving process. (Of course, light load slow speed is still allowed) You must wait for the car to stop to operate the control handle. Because if you manipulate it on the way, it may block your view and cause an accident.

The container front hoist consists of three parts: engineering machinery chassis, telescopic boom, container spreader, etc. The chassis has engine, power shift transmission, front axle, rear axle, steering system, cab, frame, counterweight, wheels, etc. Components; telescopic boom has telescopic cylinder, pitch cylinder, boom and other components; container crane has rotating mechanism, upper frame, coupling frame, chassis, telescopic frame, telescopic cylinder,bromma spreader Suppliers anti-sloshing cylinder, side shift cylinder, rotary lock cylinder and other components .

The container is suspended from the front and side of the container. It can be used for loading and unloading of 20-foot and 40-foot containers. When lifting the container, the front crane does not have to be perpendicular to the container and can be angled with the container. After lifting, the spreader can be rotated to pass through a narrower passage. At the same time, the spreader can be moved to the left and right sides by 800mm, so that the box can be lifted during lifting to improve work efficiency. For freight stations with poor site conditions, the front hoist can also work normally.