Shanghai Ying Yu Port Machinery Co., Ltd. was founded in 2011. It is wholesale ZPMC spreader spare parts manufacturers that produces and sells port machinery equipment spare parts.
As we all know, it is very important for cranes, and it is also directly related to the quantity and safety of lifting goods. Do you know how to use the spreader better?
1. When using the spreader, do not knot, twist or twist, so as not to affect the actual use effect. 2. When using a spreader for hoisting, the hoisting load should not exceed the working load of the spreader. Visual inspection of the spreader is required before use to ensure that it can be put into use after meeting the requirements.
3. When using a spreader to lift heavy objects, it should be lifted, lowered and stopped slowly and steadily to avoid shock loads. At the same time, heavy objects cannot be hung on the spreader for a long time.
4. The grade of the hoisting auxiliary parts shall not be lower than the grade of the spreader, and the spreader shall be prevented from falling from a height, so as to avoid deformation of the spreader and surface or internal damage.
5. When the spreader is surrounded by hanging objects, pads must be added at the edges and corners to prevent the spreader from being damaged by unreasonable force.
6. Overload use is strictly prohibited, and no one can stand under the hoisting object to ensure safety.
7. The used spreader should not be placed on the ground for a long time. It should be hung on a special bracket according to different types, stored cleanly, coated with anti-rust oil after drying, and then placed in a dry and ventilated place.